Cabletron Systems FOT-F3 Manuale Utente

Page 3 - 9

•

Allows the AUI cable to be easily connected from the
transceiver to the workstation.

•

Has a smooth, dirt-free surface which will easily
accept the adhesive bonds.

Mount the FOT-F3 as follows:

1.

Separate the two 1.5" x 3" Velcro mounts.

2.

Peel off the paper that covers the adhesive backing of
one Velcro mount.

3.

Carefully position the Velcro on the back of the
FOT-F3.  Be sure to press firmly so that the adhesive
firmly affixes.

4.

Similarly, place the other half of Velcro on the surface
on which you want to mount the FOT-F3.

5.

Attach the FOT-F3 to the Velcro mount.

Some attempt should be made to strain relief the cables
attached to the FOT-F3, whether or not the transceiver is
mounted.