3com 3C319 Manuale Utente
3
I
NSTALLING
N
ET
W
ARE
DOS C
LIENTS
A
UTOMATICALLY
The 3Com AutoLink software utility automatically
configures one 3C319 NIC and installs the DOS 16-bit
ODI client network driver for NetWare 3.12 and 4.10
systems. This chapter describes running the AutoLink
program. Disregard this chapter if you do not want to
install the DOS 16-bit client driver for NetWare.
configures one 3C319 NIC and installs the DOS 16-bit
ODI client network driver for NetWare 3.12 and 4.10
systems. This chapter describes running the AutoLink
program. Disregard this chapter if you do not want to
install the DOS 16-bit client driver for NetWare.
AutoLink Software Functions
AutoLink software configures your PC as a NetWare DOS
ODI client. The AutoLink configuration program performs
the following functions:
ODI client. The AutoLink configuration program performs
the following functions:
■
Configures a single 3C319 NIC.
The AutoLink configuration utility cannot be used to
configure multiple 3C319 NICs.
configure multiple 3C319 NICs.
■
Installs the NetWare client software from TokenDisk
diskette #1.
diskette #1.
■
Modifies the CONFIG.SYS, AUTOEXEC.BAT, and
NET.CFG files. (The previous versions of these files
are renamed CONFIG.3CM, AUTOEXEC.3CM,
and NET.3CM.)
NET.CFG files. (The previous versions of these files
are renamed CONFIG.3CM, AUTOEXEC.3CM,
and NET.3CM.)
The AutoLink configuration utility is a DOS application.
It cannot run in PCs running OS/2, Windows 95, or
Windows NT.
It cannot run in PCs running OS/2, Windows 95, or
Windows NT.