3com 3C319 Manuale Utente
6-2
C
HAPTER
6: I
NSTALLING
A
N
ETWORK
D
RIVER
FOR
W
INDOWS
NT
Before Installing the Driver
Before installing the driver, make sure that Windows NT
is installed and that the following procedures have
been completed:
is installed and that the following procedures have
been completed:
■
The 3C319 NIC has been installed as described in
■
Plug and Play (PnP) has been manually disabled
as described in
as described in
.”
Windows NT versions 3.51 and 4.0 are not PnP-enabled.
■
The NIC has been manually configured as described
in
in
If your network environment uses the TCP/IP
communications protocol, you must obtain from
your network administrator all the information you
will need to define an IP address during the
installation process.
communications protocol, you must obtain from
your network administrator all the information you
will need to define an IP address during the
installation process.
Installing the NDIS 4 Driver for Windows NT
This section describes installing the 3C319 NIC NDIS 4
driver for the following Microsoft Windows NT versions:
driver for the following Microsoft Windows NT versions:
■
Windows NT 3.51
■
Windows NT 4.0
Windows NT 3.51
Follow these steps to install the NDIS 4 driver for
Windows NT 3.51:
Windows NT 3.51:
1 Insert TokenDisk diskette #2 in the floppy drive.
2 In the Main group, double-click the Control
Panel icon.
3 In the Control Panel group, double-click the
Network icon.
4 In the Network Settings dialog box, click
Add Adapter.