3com 3C319 Manuale Utente
Adding Class of Service Ranges and Protocols
7-3
3 Click the boxes next to the appropriate
application names for which you want to
activate Class of Service.
activate Class of Service.
For the NDIS 4 driver to recognize high-priority network
traffic, it must know if a stream of network traffic was
generated by a given application.
traffic, it must know if a stream of network traffic was
generated by a given application.
If an application is not listed here, you can obtain
the necessary information from the application’s
manufacturer and manually enter the information in
the Additional Ranges tab.
the necessary information from the application’s
manufacturer and manually enter the information in
the Additional Ranges tab.
4 Click OK.
Adding Class of Service Ranges and Protocols
You can add information for Class of Service applications
that you want to prioritize but which are not listed on
the 3Com Class of Service Setup screen (
that you want to prioritize but which are not listed on
the 3Com Class of Service Setup screen (
).
You must specify port or socket ranges as well as the
network protocol being used. Obtain the information
from the application manufacturer. The Class of Service
network driver uses these ranges to determine whether a
packet should be treated as high-priority.
network protocol being used. Obtain the information
from the application manufacturer. The Class of Service
network driver uses these ranges to determine whether a
packet should be treated as high-priority.
To add the Class of Service ranges and protocols, follow
these steps:
these steps:
1 Click the Additional Ranges tab.
The Class of Service Additional Ranges screen appears,
as shown in
as shown in
.
c