3com 3C319 Manuale Utente
Installing a Driver for Windows for Workgroups
8-7
Before Installing the Driver
Before installing the driver, make sure that the following
procedures have been completed:
procedures have been completed:
■
The 3C319 NIC has been installed as described in
■
Plug and Play (PnP) has been manually disabled
as described in
as described in
.”
Windows for Workgroups is not a PnP-enabled
operating system.
operating system.
■
The NIC has been manually configured as described
in
in
Viewing the Driver Installation Instructions
Follow these steps to view the instructions:
1 Exit to the DOS prompt.
2 Insert TokenDisk diskette #1 in drive A and type at
the prompt:
a:\help [Enter]
3 From the main Help menu, select Windows and
press [Enter].
4 From the Windows Help menu, select one of the
following and press [Enter]:
■
NDIS 3 (protected-mode driver)
■
NDIS 2 (real-mode driver)
■
NetWare (real-mode driver)
When using non-Novell protocol stacks (for example,
Microsoft IPX protocol stacks with the NetWare client
driver), you must disable the Parallel Tasking feature of
the 3C319 NIC. The procedure is described in the
NetWare (real-mode driver) Help file.
Microsoft IPX protocol stacks with the NetWare client
driver), you must disable the Parallel Tasking feature of
the 3C319 NIC. The procedure is described in the
NetWare (real-mode driver) Help file.
To complete the installation, follow the directions on
the screen.
the screen.