Panasonic WV-CU650 Manuale Utente

53

2. Select a desired function.

Select a desired category by rotating the shuttle ring.

3. Select a function name by rotating the JogDial.

• You can skip Step 2 if you know what function to

recall. In this case, enter a function number, and
press the ENTER button.

4. Press the function button you wish to assign the func-

tion for two seconds. The function will be assigned to
the button, and the message will appear for a few sec-
onds.

• To assign menu functions to F5 to F8 buttons, press

one of the F1 to F4 buttons for two seconds while
holding down the SHIFT button.

• The setting procedure differs depending on each

function. Refer to pp. 55 to 73.

5. To exit the menu, press the EXIT or MON (ESC) button.

The LCD display will return to the default status.

■ To Assign Menu Functions to

Joystick button functions are assignable to the A, B, or top
button on the 3D joystick unit. (Refer to p. 68 to 72 for each
function.)

1. Perform Step 1 to 3 in “To Assign Menu Functions to

Function Buttons”. (Refer to p. 52.)

Note:  Skip the next step when assigning neither

“Camera Function” nor “System Function”.

2. Enter a desired camera or system function number with

the numeric buttons. The entered number will appear
on the LCD for a few seconds.

• The illustration is an example in which Camera

Function Number 1 is pressed.

• Refer to the operating instruction of camera for

details on camera function.

• Refer to the operating instruction of system unit for

details on system function.

3. Press the A, B or top button for two seconds.

• The menu function will be assigned to the button

you pressed.

• “Assign” message will appear for a few seconds, as

shown in the illustration.

Note: The illustration is an example in which “Camera

Function Code = 1” has been assigned to the A
button.

4. To exit the menu, press the EXIT or MON (ESC) button.

The LCD will return to the normal display.

■ To Recall Button Functions and

You can recall the assigned button functions and joystick
button functions as follows.

1. Press one of the function buttons (F1 to F4/F5 to F8) or

one of the joystick function buttons (A, B, and top but-
tons). The sub menu of recalled function will appear on
the LCD.

Note: To recall a function assigned to the F5 to F8 but-

ton, press the function button while holding down
the SHIFT button.

2. Perform the operations to activate the function.

The operating procedure differs depending on each
function. Refer to pp. 55 to 73.

Note: To cancel the function, press the EXIT or MON

(ESC) button. The LCD display will return to the nor-
mal status.

Mux Still        305

Assign F2

Camera Function  501

Assign A   Code=   1

Camera Setup      F1

  On  Off  Rst A.Rst

Mon02 Cam128   HD316

  F1   F2   F3   F4

LCD MENU     CAM 101

Camera Setup

LCD MENU     SYS 301

System Setup

LCD MENU     SYS 305

Mux Still

J/S MENU       ____1

Camera Function