Panasonic BB-HCS301A Manuale Utente
Operating Instructions
54
•
Set up the IPsec policy as shown below.
9.
Access this product (see page 12).
•
If you can access this product, the IPsec setup is complete.
Notes
•
In IPsec communications, "IPsec" is displayed on the Top page or the
Single Camera page.
Single Camera page.
•
If you cannot communicate using IPsec, see page 20 of the
Troubleshooting on the Setup CD-ROM.
Troubleshooting on the Setup CD-ROM.
•
See the Panasonic support website at
http://panasonic.co.jp/pcc/products/en/netwkcam/ for the IPsec
features.
features.
Phase 2
Mode
Quick mode
PFS
Specifies either of Off, D-H Group 1 or D-
H Group 2.
H Group 2.
Cipher Algorithm
Select from DES-CBC, 3DES-CBC,
AES-CBC (128, 192, 256 bits) or NULL.
(Multiple selections are available.)
AES-CBC (128, 192, 256 bits) or NULL.
(Multiple selections are available.)
Message-Digest
Algorithm
Algorithm
HMAC-MD5-96, HMAC-SHA-1-96
(Multiple selections are available.)
(Multiple selections are available.)
Lifetime
Specifies by 28800 s (Byte setting is not
supported.)
supported.)
*1
This product does not support aggressive mode.
Items
Settings
Protocol
ANY
Source Network
Network address and subnet mask on the LAN side of the
VPN router
VPN router
Source IP address
A global address on the WAN side of the VPN router
Destination Network
A global address of camera server
Destination IP address
A global address of camera server
IKE Items
Settings