TP-LINK TL-WN7200ND Manuale Utente

 

- 22 -

 

 

Figure 4-3 Config Setting Page 

¾

  SSID – Enter the SSID of your soft AP, or you can press “<- Use Mac Address” button to 

keep the Mac Address as your SSID. 

¾

  Channel – Select the channel from the drop-down list

.

 This field determines which operating 

frequency will be used. 

¾

  Beacon – Enter a value between 20-1000 milliseconds for Beacon Interval here. The 

beacons are the packets sent by the router to synchronize a wireless network. Beacon 
Interval value determines the time interval of the beacons. The default value is 100. 

¾

  TX Power –Manually force the AP’s transmitting power. System default is 100%. 

¾

  Idle Time - Manually force the Idle Time using a selected value. The default is 300. 

Click the Access Control tab of the utility and the Access Control screen will appear as Figure 

4-4. In this page, you can enable/disable the AP to connect with the specified Mac address.