Texas Instruments TLV320AIC3107EVM-K Manuale Utente
1
EVM Overview
1.1
Features
1.2
Introduction
2
EVM Description and Basics
2.1
TLV320AIC3107EVM-K Block Diagram
www.ti.com
EVM Overview
•
Full-featured evaluation board for the TLV320AIC3107 2-channel audio codec with integrated Class-D
amplifier.
amplifier.
•
Modular design for use with a variety of digital signal processor (DSP) and microcontroller interface
boards.
boards.
•
USB connection to PC provides power, control, and streaming audio data for easy evaluation.
•
Onboard microphone for ADC evaluation
•
Connection points for external control and digital audio signals for quick connection to other
circuits/input devices.
circuits/input devices.
The TLV320AIC3107EVM-K is a complete evaluation kit, which includes a universal serial bus
(USB)-based motherboard and evaluation software for use with a personal computer (PC) running the
Microsoft Windows™ operating system (Win2000 or XP).
(USB)-based motherboard and evaluation software for use with a personal computer (PC) running the
Microsoft Windows™ operating system (Win2000 or XP).
The TLV320AIC3107EVM is in the Texas Instruments modular EVM form factor, which allows direct
evaluation of the device performance and operating characteristics, and eases software development and
system prototyping. This EVM is compatible with the 5-6K Interface Evaluation Module (
evaluation of the device performance and operating characteristics, and eases software development and
system prototyping. This EVM is compatible with the 5-6K Interface Evaluation Module (
) and the
HPA-MCUINTERFACE (
) from Texas Instruments and additional third-party boards which
supports the TI Modular EVM format.
The TLV320AIC3107EVM-K is a complete evaluation/demonstration kit, which includes a USB-based
motherboard called the USB-MODEVM Interface board and evaluation software for use with a PC running
the Microsoft Windows operating systems.
motherboard called the USB-MODEVM Interface board and evaluation software for use with a PC running
the Microsoft Windows operating systems.
The USB connection from the PC provides power, control, and streaming audio data to the EVM for
reduced setup and configuration. The EVM also allows external control signals, audio data, and power for
advanced operation, which allows prototyping and connection to the rest of the evaluation/development
system.
reduced setup and configuration. The EVM also allows external control signals, audio data, and power for
advanced operation, which allows prototyping and connection to the rest of the evaluation/development
system.
This section provides information on the analog input and output, digital control, power, and general
connection of the TLV320AIC3107EVM.
connection of the TLV320AIC3107EVM.
The TLV320AIC3107EVM-K consists of two separate circuit boards, the USB-MODEVM and the
TLV320AIC3107EVM. The USB-MODEVM is built around a TAS1020B streaming audio USB controller
with an 8051-based core.
TLV320AIC3107EVM. The USB-MODEVM is built around a TAS1020B streaming audio USB controller
with an 8051-based core.
The simple diagram of
shows how the TLV320AIC3107EVM is connected to the USB-MODEVM.
The USB-MODEVM Interface board is intended to be used in USB mode, whereas control of the installed
EVM is accomplished using the onboard USB controller device. Provision is made, however, for driving all
the data buses (I
EVM is accomplished using the onboard USB controller device. Provision is made, however, for driving all
the data buses (I
2
C, I
2
S, etc.) externally. The source of these signals is controlled by SW2 on the
USB-MODEVM. See
for details on the switch settings.
SLAU261 – November 2008
TLV320AIC3107EVM-K
3