Nortel Networks NN43011-110 Manuale Utente
44
Fiber-optic and IP expansion
an SSC card equipped with an IP Expansion daughterboard. Slot 14 of
the Expansion contains the NTDK16 48-port Digital Line card.
the Expansion contains the NTDK16 48-port Digital Line card.
shows another example of a "mix-and-match"
configuration in which a Main Cabinet uses both fiber and IP cabling
to connect two Expansion Cabinets and one Expansion Chassis. The
Expansion Chassis is equipped with a Chassis Expander.
to connect two Expansion Cabinets and one Expansion Chassis. The
Expansion Chassis is equipped with a Chassis Expander.
Note:
is only an example of one of many possible
configurations using Cabinets and Chassis.
In this example, the SSC card in the Main Cabinet has one dual-port
Fiber Expansion daughterboard installed in the top connector and one
single-port IP Expansion daughterboard installed in the bottom connector.
The dual-port Fiber Expansion daughterboard in the top connector supports
card slots 11–20 and 31–40. The single-port IP Expansion daughterboard
in the bottom connector supports card slots 21–30.
Fiber Expansion daughterboard installed in the top connector and one
single-port IP Expansion daughterboard installed in the bottom connector.
The dual-port Fiber Expansion daughterboard in the top connector supports
card slots 11–20 and 31–40. The single-port IP Expansion daughterboard
in the bottom connector supports card slots 21–30.
Note: When both Fiber and IP Expansion daughterboards co-exist in a
system, configure the Fiber Expansion daughterboard as expansions 1
and 3 and the IP Expansion daughterboard as expansions 2 and 4.
system, configure the Fiber Expansion daughterboard as expansions 1
and 3 and the IP Expansion daughterboard as expansions 2 and 4.
Nortel Communication Server 1000
Communication Server 1000M and Meridian 1 Small System Overview
NN43011-110
01.01
Standard
Release 5.0
30 May 2007
Copyright © 2003 - 2007, Nortel Networks
.