Nortel Networks R2MFC Manuale Utente

Chapter 2 Overview 25

R2MFC Media Bay Module Installation and Configuration Guide

The R2MFC MBM receives its power from the BCM chassis through a power connector on the 
back of the module. 

 shows the placement of the power connectors.

Figure 4   R2MFC MBM back 

There are DIP switches located on the underside of the R2MFC MBM. These DIP switches are 
used to select the DS30 buses from the DS256 bus. These DIP switches must be set before the 
R2MFC MBM is installed.

 shows the location of the DIP switches.

Figure 5   DIP switch location on the 

R2MFC MBM

DS256 and 
power connector

6 5 4 3 2 1

Off

On

Underside of the R2MFC 

DIP switches

Back of the R2MFC MBM