Nortel Networks R2MFC Manuale Utente

R2MFC Media Bay Module Installation and Configuration Guide

5 Do not place this product on an unstable cart, stand or table. The product may fall, causing 

serious damage to the product.

6 This product should never be placed near or over a radiator or heat register. This product 

should not be placed in a built-in installation unless proper ventilation is provided.

7 Do not allow anything to rest on the power cord. Do not locate this product where the cord will 

be abused by persons walking on it.

8 Do not overload wall outlets and extension cords as this can result in the risk of fire or electric 

shock.

9 Never spill liquid of any kind on the product.

10 To reduce the risk of electric shock do not disassemble this product, but have it sent to a 

qualified service person when some service or repair work is required. 

11 Unplug this product from the wall outlet and refer servicing to qualified service personnel 

under the following conditions: 

a When the power supply cord or plug is damaged or frayed.

b If the product has been exposed to rain, water or liquid has been spilled on the product, 

disconnect and allow the product to dry out to see if it still operates; but do not open up the 
product.

c If the product housing has been damaged.

d If the product exhibits a distinct change in performance.

12 Avoid using a telephone during an electrical storm. There may be a remote risk of electric 

shock from lightning.

13 Do not use the telephone to report a gas leak in the vicinity of the leak.

14 Caution: To eliminate the possibility of accidental damage to cords, plugs, jacks, and the 

telephone, do not use sharp instruments during the assembly procedures.

15 Save these instructions.

This is a class A product. In a domestic environment this product may cause radio interference in 
which case the user may be required to take adequate measures.

Hereby, Nortel Networks declares that this equipment is in compliance with the essential 
requirements and other relevant provisions of Directive 1999/5/EC.

The CE Marking on this equipment indicates compliance with 

the following:
This device conforms to Directive 1999/5/EC on Radio 

Equipment and Telecommunications Terminal Equipment as 

adopted by the European Parliament And Of The Council.