Nortel Networks 201i Manuale Utente
Connecting peripheral devices to the 201i server
Standard 1.07
154
CallPilot
Note: Ensure that the cable is securely fastened.
2 If you have not already done so, connect the amphenol connector drain
wire as follows:
Option 11C or Meridian 1 to the nearest backplane grounding bolt on
the switch
the switch
The following diagram shows drain wire connection on the
Option 11C.
Option 11C.
Option 11C Mini or
Succession 1000
Succession 1000
ensure that the 50-pin amphenol connector
on the multi I/O cable (NTRH0912) is
connected to the high-density connector
associated with the left slot occupied by
the 201i server.
on the multi I/O cable (NTRH0912) is
connected to the high-density connector
associated with the left slot occupied by
the 201i server.
IF you are installing the
201i server in a
201i server in a
THEN
G101552
Drain wire
Multi I/O cable
NTRH0912
NTRH0912