Nortel Networks 201i Manuale Utente
Connecting peripheral devices to the 201i server
Standard 1.07
160
CallPilot
Result: The operating system boot sequence begins, and
communication with the switch occurs. The HEX display shows NT (for
about 30 seconds), followed by OK.
communication with the switch occurs. The HEX display shows NT (for
about 30 seconds), followed by OK.
Note: The system reboots more than once. The HEX display repeats
with each reboot.
with each reboot.
Note: Before OK appears, one of the following messages can appear,
but not for more than one second: CDLN, C:01, or C:02. This is normal
operation.
but not for more than one second: CDLN, C:01, or C:02. This is normal
operation.
If OK does not appear, refer to the CallPilot server maintenance and
diagnostics guide for your serve
diagnostics guide for your serve
r
for troubleshooting instructions.