Nortel Networks 201i Manuale Utente
November 2006
Installing the 201i server in a large Meridian 1 system
201i Server Hardware Installation
67
In this diagram, the CD-ROM drive is the first device. The tape drive is the
last device.
last device.
Note: Alternate SCSI device connection scenarios are supported, but are not
depicted in this guide. If you want to use a connection scenario that is not
described in this guide, ensure that you use appropriate cabling for each
device.
depicted in this guide. If you want to use a connection scenario that is not
described in this guide, ensure that you use appropriate cabling for each
device.
Before you begin
Before you install the SCSI devices in a daisy chain, you must configure the
SCSI device IDs and DIP switches. For instructions, refer to Chapter 7,
“Preparing peripheral devices.”
SCSI device IDs and DIP switches. For instructions, refer to Chapter 7,
“Preparing peripheral devices.”
Meridian 1
201i cabling
Peripheral cabling
201i
NTRH30AA
NTRH30AA
Optional
NTRH9038
Tape drive
Tape drive
NTRH9105
CD-ROM
drive
CD-ROM
drive
G101430
SCSI device cable
NTRH3502
NTRH3502
Rear
I/O panel
I/O panel
NTRH1408
NTRH1410