Nortel Networks 3395A Manuale Utente

SET PORT

893-386-B

3-27

The SET PORT command changes port characteristics in the terminal server's
operational database.  These changes take effect immediately, but remain in effect only
until you log off the port or until the network manager initializes the terminal server.

Users at Secure ports can set some characteristics of their own ports, including all those
listed here.  Users at Privileged ports can define and set these and other characteristics,
as well as the characteristics of other ports.  See Commands Reference for the Model
3395/3395A Terminal Server for information about the characteristics of the
DEFINE|SET PORT commands that are accessible at Privileged and Nonprivileged
ports.

Many of the port characteristics you can set with these commands assign session
management functions, such as local switch or forward switch, to the characters you
specify.  Chapter 2 explains more about these characters.  Before you attempt to assign
a function to a character, check the current settings, if any, for the characters at your
port.  Use the SHOW PORT CHARACTERISTICS command to display the settings
of the session switching characters, the SHOW PORT ALTERNATE
CHARACTERISTICS command to display the settings of the editing control
characters, and the SHOW PORT TELNET CHARACTERISTICS command to display
the settings of Telnet session management characters.

*  An asterisk next to a setting indicates that it is the default setting for a port
characteristic.

SET PORT

 

[

port-list] [characteristic setting]

...[

characteristic setting]  [characteristic setting]

port-list Set characteristics for the ports you specify in this variable.  Because the default value is the

issuing port, you can omit the port number.

SE PO

The following is a summary of the available characteristics.  A detailed description of each follows on the
page after the summary.