Nortel Networks Option 11C Mini Manuale Utente
Chapter 9 — Installing the chassis
Page 119 of 332
Option 11C Mini
Planning and Installation Guide
3
Fasten
the chassis bracket to the back of the chassis using the
four #8-32 machine screws supplied with the bracket kit. See
Figure 24.
Figure 24.
Note: Make sure
that the slot feature on the chassis bracket is at the
top of the chassis. Also, the two tabs on the chassis bracket must
extend past the bottom of the chassis.
extend past the bottom of the chassis.
Figure 24
Chassis bracket installed on the back of the chassis
Chassis bracket installed on the back of the chassis
4
Lift the chassis into place so that the slot on the chassis bracket
engages the hook feature on the wall bracket.
Carefully lower the chassis until the hook on the wall bracket fits
securely into the slot on the chassis bracket.
engages the hook feature on the wall bracket.
Carefully lower the chassis until the hook on the wall bracket fits
securely into the slot on the chassis bracket.
5
Fasten the chassis in position.
Fasten the tabs, that extend past the bottom of the chassis, to the
plywood backboard. Use the two remaining #12 wood screws from the
bracket kit to fasten the tabs to the backboard. See Figure 25.
Fasten the tabs, that extend past the bottom of the chassis, to the
plywood backboard. Use the two remaining #12 wood screws from the
bracket kit to fasten the tabs to the backboard. See Figure 25.
Tabs
Slot feature.
The hook feature on
the wall bracket fits
into this slot.
The hook feature on
the wall bracket fits
into this slot.