Nortel Networks Option 11C Mini Manuale Utente
Page 244 of 332
Chapter 17 — Connecting the telephones
553-3021-209
Standard 3.00
April 2000
Cross-connecting terminal Digital Subscriber Loops
Refer to ISDN BRI Administration and Maintenance Guide (553-3011-311)
for a complete description of terminal Digital Subscriber Loops (DSL) cross-
connecting and installation.
for a complete description of terminal Digital Subscriber Loops (DSL) cross-
connecting and installation.
Activating telephones
Activating telephones is not difficult. Activate each telephone by performing
a procedure on the telephone. Automatic Set Configuration is the software
feature used to activate telephone sets.
a procedure on the telephone. Automatic Set Configuration is the software
feature used to activate telephone sets.
Note: You cannot activate the data feature using the procedures in this
chapter. To
chapter. To
program a telephone with the data feature, configure it in
LD 11 with Data Class of Service. See the X11 Software Administration
Guide.
Guide.
This chapter contains procedures for activating the following models of
telephones:
telephones:
•
a default model with a default extension number
•
a customized model with a customized extension number
This chapter provides these procedures for telephones with and without
character displays.
character displays.
Telephone tones
There are a number of different telephone tones. Table 54 includes tones that
you hear during telephone activation. Table 55 includes tones that you hear
during telephone activation in Germany.
you hear during telephone activation. Table 55 includes tones that you hear
during telephone activation in Germany.