Nortel Networks Option 11C Mini Manuale Utente
Page 328 of 332
Appendix B – Changing preprogrammed data
553-3021-209
Standard 3.00
April 2000
Printing model information
To print information about model telephones, use LD 20.
Analog telephones
LD 20
REQ PRT
TYPE 500 M
MODL YYY “YYY” = the telephone model number.
If you want to print all of the models for
this telephone type, leave this value blank.
Digital telephones
Note: To print M3000 telephone models, you must enter “TYPE 3000
M”. If you enter “TYPE 2XXX M”, you print all the Meridian Digital
Telephone models except the M3000.
M”. If you enter “TYPE 2XXX M”, you print all the Meridian Digital
Telephone models except the M3000.
LD 20
REQ PRT
TYPE 2XXX M or 3000 M “XXX” = the telephone type
MODL YYY “YYY” = the telephone model number
(between 1 - 127). If you want to print all
of the models for this telephone type, leave
this value blank.
of the models for this telephone type, leave
this value blank.
Removing model telephones
Use LD 10 to remove analog telephone models and LD 11 to remove digital
telephone models. Respond as follows to the prompts in either overlay:
telephone models. Respond as follows to the prompts in either overlay:
LD 10 or LD 11
REQ
OUT
TYPE
XXXX M “XXXX” = telephone type for the model
you are removing (Example: 500, 2006,
2317, 2216, 3000.)
you are removing (Example: 500, 2006,
2317, 2216, 3000.)
CUST
0
MODL YYY “YYY” = the model number associated
with the telephone type you are removing
(Valid range is 1-127).
(Valid range is 1-127).