Nortel Networks 4050 Manuale Utente

136 Chapter 4 Configuring the domain

320818-A

 

The Server 1001 menu includes the following options:

To verify connectivity and to capture information about SSL and TCP traffic 
between clients and the portal server, use the following command:

followed by:

port <port>

Specifies the port to which the portal server listens for 
HTTPS communications. 

•

 is an integer in the range 1–65534 that 

indicates the TCP port number. The default is 443.

interface 
<interface ID>

Specifies the backend interface used by the server. 

•

 is an integer that indicates the 

interface number. The default is 0.

dnsname <name>

Assigns a DNS name to the portal IP address.

•

 is the fully qualified domain name (FQDN) of 

the pVIP (for example, nsnas.example.com).

Generally, you need to specify a DNS name only if your 
corporate DNS server is unable to perform reverse 
lookups of the portal IP address.

When you press Enter after specifying the DNS name, 
the system performs a check against the DNS server 
included in the system configuration (see 

) to verify that:

•

the FQDN is registered in DNS

•

the resolved IP address corresponds to the pVIP

trace

Accesses the Trace menu, in order to capture and 
analyze SSL and TCP traffic between clients and the 
portal server. For more information, see 

ssl

Accesses the SSL Settings menu, in order to 
configure SSL settings for the portal server (see 

adv

Accesses the Advance settings menu, in order to 
configure traffic log settings for a syslog server (see