Nortel Networks 4050 Manuale Utente

204 Chapter 5 Configuring groups and profiles

320818-A

 

When you first create the profile, you are prompted to enter the following 
parameters:

•

client filter name — the name of the predefined client filter that determines 
whether the Nortel SNAS 4050 will apply this extended profile to the user. To 
view available filters, press TAB at the prompt. You can later change the filter 
referenced by the profile by using the 

 command on the Extended 

Profile menu.

•

VLAN — the name of the VLAN to which the Nortel SNAS 4050 will assign 
users with this profile. You can later change the VLAN assignment for the 
profile by using the 

 command on the Extended Profile menu.

The Extended Profile menu displays.

The Extended Profile

menu includes the following options:

Note: If you ran the quick setup wizard during initial setup, two 
extended profiles have been created: profile ID 1 associated with client 
filter 

tg_failed

, and profile ID 2 associated with client filter 

tg_passed

.

followed by:

filter <name>

Specifies the predefined client filter that determines 
whether the Nortel SNAS 4050 will apply this extended 
profile to the user. If the user’s TunnelGuard check 
result matches the filter’s criteria, the Nortel 
SNAS 4050 will apply the extended profile. To view 
available filters, press TAB following the 

 

command.

•

 is a string that must be unique in the domain.

For information about configuring client filters, see 

vlan <name>

Specifies the VLAN to which the Nortel SNAS 4050 will 
assign users with this profile.

•

 is a string that must be unique in the domain.