Nortel Networks 4050 Manuale Utente

Chapter 11 Managing certificates 589

Nortel Secure Network Access Switch 4050 User Guide

 

To import a certificate and private key into the Nortel SNAS 4050, perform the 
following steps.

Upload the certificate file and key file to the file exchange server.

Access the Certificate menu by using the 

/cfg/cert <cert id>

 

command, where <

> is the certificate number.

To install a new certificate, specify an unused certificate number. To replace 
an installed certificate, specify the installed certificate index number.

To view basic information about all configured certificates, use the 

 command. To verify that the current certificate number is not in use by 

an installed certificate, use the 

 command.

Import the certificate. Enter the following command:

You are prompted to enter the certificate and private key import information. 
If the private key has been password protected, you are prompted for the 
correct password phrase as well. 

 explains the required parameters.

Note: You can arrange to include your private key in the certificate file. 
When the Nortel SNAS 4050 retrieves the specified certificate file from 
the file exchange server, the Nortel SNAS 4050 software analyzes the 
contents and automatically adds the private key, if present.

Certificate and key import information

Protocol

The file import protocol. The options are TFTP, FTP, 
SCP, SFTP. The default is TFTP.

Server host name or IP address The host name or IP address of the file exchange 

server.

File name

The name of the file on the file exchange server.