Nortel Networks 4050 Manuale Utente
Chapter 2 Initial setup 67
Nortel Secure Network Access Switch 4050 User Guide
3
To finish connecting the Nortel SNAS 4050 to the rest of the network,
complete the following tasks:
complete the following tasks:
a
Generate and activate the SSH keys for communication between the
Nortel SNAS 4050 and the network access devices (see
Nortel SNAS 4050 and the network access devices (see
b
Specify the SRS rule for the
tunnelguard
group (see
or
c
Add the network access devices (see
d
e
If you did not run the quick setup wizard during the initial setup,
configure the following:
configure the following:
— Create the domain (see
or
).
— Create at least one group.
— Specify the VLANs to be used when the TunnelGuard check succeeds
and when it fails (see
).
4
Save the configuration (see
Applying and saving the configuration
On both the CLI and the SREM, you must enter explicit commands in order to
make configuration changes permanent and in order to create a backup
configuration file.
make configuration changes permanent and in order to create a backup
configuration file.