Nortel Networks 4050 Manuale Utente
Appendix B Syslog messages 873
Nortel Secure Network Access Switch 4050 User Guide
switch controller:switch
[1:<switchID>] – Disconnected
[1:<switchID>] – Disconnected
INFO
NSNAS
Switch <switchID> of Domain 1 has
disconnected from the NSNAS.
disconnected from the NSNAS.
switch controller:switch
[1:<switchID>] – Modified
[1:<switchID>] – Modified
INFO
NSNAS
The CLI configuration of Domain 1, Switch
<switchID> has been modified.
<switchID> has been modified.
System started [isdssl-<version>]
INFO
System
Control
Control
Sent whenever the system control process
has been (re)started.
has been (re)started.
The private key and certificate
don't match for <server nr>
don't match for <server nr>
ERROR
Traffic
Processing
Processing
Key and certificate does not match for
server #. The certificate has to be changed.
server #. The certificate has to be changed.
TPS license limit (<limit>)
exceeded
exceeded
WARNING
Traffic
Processing
Processing
The transactions per second (TPS) limit
has been exceeded.
has been exceeded.
TPS license limit: <limit>
INFO
Start-up
TPS limit set to <limit>.
transferring user <user> on
Switch=”1:<switchID>(<IPaddr>)”,
Port=”<unit/port>” to
Vlan=”<vlan>(<vlanID>)
Switch=”1:<switchID>(<IPaddr>)”,
Port=”<unit/port>” to
Vlan=”<vlan>(<vlanID>)
INFO
NSNAS
Client device on Domain 1, Switch
<switchID> (switch IP address <IPaddr> ),
Unit <unit>, Port <port> is being moved to
the VLAN named <vlan> with VLAN ID
<vlanID>.
<switchID> (switch IP address <IPaddr> ),
Unit <unit>, Port <port> is being moved to
the VLAN named <vlan> with VLAN ID
<vlanID>.
tunnelguard: user
<username>[<pVIP>] – SRS
check failed, restrictingSRS –
<SRS rule> <comment> – <item>
– <reason>
<username>[<pVIP>] – SRS
check failed, restrictingSRS –
<SRS rule> <comment> – <item>
– <reason>
INFO
NSNAS
TunnelGuard applet report: The user with
user name <username>, logged on to the
Nortel SNAS 4050 portal with portal Virtual
IP address <pVIP>, has failed the SRS rule
check, and access is restricted in
accordance with the behavior configured
for SRS rule failure. To identify the rule, the
message includes the <SRS rule> name
and additional <comment> information
defined for the rule. The message also
includes the element of the SRS rule
(<item>) that failed and the <reason> (for
example, file not found).
user name <username>, logged on to the
Nortel SNAS 4050 portal with portal Virtual
IP address <pVIP>, has failed the SRS rule
check, and access is restricted in
accordance with the behavior configured
for SRS rule failure. To identify the rule, the
message includes the <SRS rule> name
and additional <comment> information
defined for the rule. The message also
includes the element of the SRS rule
(<item>) that failed and the <reason> (for
example, file not found).
tunnelguard: user
<username>[<pVIP>] – SRS
checks ok, open session
<username>[<pVIP>] – SRS
checks ok, open session
INFO
NSNAS
TunnelGuard applet report: The user with
user name <username>, logged on to the
Nortel SNAS 4050 portal with portal Virtual
IP address <pVIP>, has passed the SRS
rule check and is authorized to start a
session in a Green VLAN.
user name <username>, logged on to the
Nortel SNAS 4050 portal with portal Virtual
IP address <pVIP>, has passed the SRS
rule check and is authorized to start a
session in a Green VLAN.
Unable to find client private key for
<server #>
<server #>
ERROR
Traffic
Processing
Processing
Key for doing sslconnect is not valid.
Please reconfigure.
Please reconfigure.
Unable to use client certificate for
<server #>
<server #>
ERROR
Traffic
Processing
Processing
Certificate for doing sslconnect is not valid.
Please reconfigure.
Please reconfigure.
Unable to use client private key for
<server #>
<server #>
ERROR
Traffic
Processing
Processing
Key for doing sslconnect is not valid.
Please reconfigure.
Please reconfigure.
Table 204
Syslog messages in alphabetical order (Sheet 9 of 10)
Message
Severity
Type
Explanation