Sun Microsystems 3U Manuale Utente
30
SunATM 3U CompactPCI Adapter Installation and User’s Guide • February 2001
Physical-Layer Parameter Group
The physical-layer parameter group contains only the framing interface parameter.
The following example shows the physical-layer parameter menu.
The following example shows the physical-layer parameter menu.
Framing Interface
The framing interface defines the encapsulation method used for ATM cells as they
are sent onto the wire. The default framing interface is SONET, but the SunATM
software also supports the SDH interface. Your switch product information should
indicate whether your switch uses either the SONET or the SDH interface. If the
switch uses the SDH interface, you will need to select SDH from the physical-layer
parameter group menu.
are sent onto the wire. The default framing interface is SONET, but the SunATM
software also supports the SDH interface. Your switch product information should
indicate whether your switch uses either the SONET or the SDH interface. If the
switch uses the SDH interface, you will need to select SDH from the physical-layer
parameter group menu.
Modifying ba0; Current framing interface is SONET
The framing interfaces that may be configured are:
sonet
sdh
[P] Previous Menu
[M] Main Menu
[X] Exit
[?] Help
Enter selection: