Lucent Technologies 518-456-10 Manuale Utente
34
5.
At this point, do one of the following:
■
Go to Step 3 of the next procedure to program another button for this
extension.
extension.
■
Press
c
and go to Step 2 of any button programming
procedure in this section to program a button for a different extension.
■
Press
f00
to exit.
Do Not Disturb (F01)
Used in conjunction with either automatic VMS cover or manual VMS cover,
this button lets a subscriber send calls immediately to his or her mailbox
(instead of ringing the extension first).
this button lets a subscriber send calls immediately to his or her mailbox
(instead of ringing the extension first).
To program a Do Not Disturb (DND) button as specified on Form C:
1.
Press
f00ssc
.
2.
Enter the number of the extension to be programmed.
3.
Press a programmable button with lights.
4.
Press
f01
.
5.
At this point, do one of the following:
■
Go to Step 3 of the next procedure to program another button for this
extension.
extension.
■
Press
c
and go to Step 2 of any button programming
procedure in this section to program a button for a different extension.
■
Press
f00
to exit.
Voice Mailbox Transfer (F14)
This button lets any system user transfer calls directly to PARTNER Voice
Messaging without ringing the extension first.
Messaging without ringing the extension first.
To program a Voice Mailbox Transfer (VMBox) button as specified on Form C:
1.
Press
f00ssc
.
2.
Enter the number of the extension to be programmed.
3.
Press a programmable button.
4.
Press
f14
.