Eicon Networks C2x Family Manuale Utente
Installing the Eiconcard C2x
7
Figure 2. Inserting the Eiconcard C2x.
e)
Fasten the adapter with the screw (to ensure that the adapter
is properly secured and grounded to the PC’s chassis).
is properly secured and grounded to the PC’s chassis).
f)
Replace the cover of your PC as described in your PC’s
manual.
manual.
g)
Reconnect the power cable.
Note
Although the Eiconcard C2x can be installed in any available
ISA expansion slot (unless the PC’s documentation specifies
otherwise), it is recommended that you install the card in a 16-bit
slot to take advantage of the higher IRQs and memory-address
locations available only through 16-bit slots.
otherwise), it is recommended that you install the card in a 16-bit
slot to take advantage of the higher IRQs and memory-address
locations available only through 16-bit slots.
3 Test the Eiconcard C2x
The application software purchased with the Eiconcard C2x
contains a test program to verify the card’s integrity. Consult the
documentation supplied with this software for details.
contains a test program to verify the card’s integrity. Consult the
documentation supplied with this software for details.
4 Configure the Eiconcard C2x
Before you can use the Eiconcard C2x, you must configure it to work
with your communications software. The documentation which
came with this software contains complete instructions on how to
configure the card.
For information on the LED functionality, see “LED Functionality”
on page 15.
with your communications software. The documentation which
came with this software contains complete instructions on how to
configure the card.
For information on the LED functionality, see “LED Functionality”
on page 15.
5 Connect to the outside world
You are now ready to connect the Eiconcard C2x to the outside world.
• To set up ISDN connections, consult “Making an ISDN Connec-
• To set up a V.24 connection, consult “Making a V.24 Connection”
screw
ISA slot
ISA
Eiconcard
Eiconcard