EIKI MD13NET Manuale Utente

Network Board

OWNER’S MANUAL

Configure the network of computer

This example explains how to set the following network address.

Select 

*

1

menu from the

[Apple] - [Control Panel] menu.

Select 

from the “Connect

via” pull-down menu and 

from the “Configure” pull-down
menu of the TCP/IP Control Panel.

Enter the IP Address*

2

and Subnet

Mask.

Enter the Router Address. 

✐ This setting is not needed if the net-

work does not provide the gateway
(router).

Close the setting window and save
the setting.

IP Address

: 192.168.0.5

Subnet Mask

: 255.255.255.0

Gateway Address : 192.168.100.1

*1 Select the “TCP/IP” item of the LAN card you use. If the “TCP/IP” item is not listed in the

column, you need to install the TCP/IP protocol. For further information refer to the user's
manual of your computer.

*2 If the network already has the TCP/IP protocol set, enter with the same IP network number

for the IP address and Subnet mask.