Manualsbrain.com
  1. Manuali
  2. Marche
  3. RAD Data comm
  4. RIC-155
  5. Manuale Utente

RAD Data comm RIC-155 Manuale Utente

Scarica
Pagina di 90
 
Configuring RIC-155 for Management 
4-1 
Chapter 4 
Configuration 
4.1 
Configuring RIC-155 for Management 
Configuration of RIC-155 is performed via menu-driven embedded software, using 
a standard ASCII terminal or PC running a terminal emulation application, 
connected to the rear panel CONTROL port. Alternatively, you can manage 
RIC-155 over Telnet, a PC running a Web browsing application such as 
ConfiguRAD or the RADview-Lite application via the MNG port.This section 
describes the configuration procedures for the RIC-155 converter. 
 
To access the Configuration menu: 
•  From the Main menu, select Configuration. 
The Configuration menu appears (see 
RIC-155 
Configuration  
1. Quick Setup   
> 
2. System Configuration 
  > 
3. Physical Ports Configuration 
  > 
4. Bridge Configuration 
  > 
 
> 
 
Please select item <1 to 4> 
ESC-prev.menu; !-main menu; &-exit 
 
Figure 4-1.  Configuration Menu 
 
The Quick Setup menu is described in the Quick Start Guide. 
 
Define the RIC-155 internal SNMP agent parameters in order to enable SNMP, 
Telnet or Web-based management (see 
). Also you can enter additional 
information about your RIC-155, such as contact person, unit location etc. 
 
To access the Management menu: 
•  Follow the path: Configuration > System Configuration >Management. 
The Management menu appears (see 
Note