Zhone Technologies Z-PLEX-10-24-DOC-SC Manuale Utente
A-32 \
Zhone Technologies
Model No.
Running Head
Error messages
Alphabetical Reference
Loopback type mismatch
User tried to deactivate a line loopback while local loopback is
active.
active.
NCHAN set to 0 please
configure the numbers of
channels
configure the numbers of
channels
User tried to configure the starting channels (SCHAN) without
configuring number of channels (NCHAN).
configuring number of channels (NCHAN).
Parameter not found
Invalid parameter in GET or SET command.
Password must be
between 7 and 12
character
between 7 and 12
character
New password not between 7 and 12 characters.
Please configure IP
address for DS0
address for DS0
After activating a DS0 management channel, you must assign it an IP
address.
address.
Please configure IP
address for FDL mgmt
address for FDL mgmt
After activating a IP over FDL management channel, you must
assign it an IP address.
assign it an IP address.
Reserved IP address
Tried to assign reserved IP address to an interface.
SLC96 on WAN2 is not
supported
supported
Tried to specify SLC96 framing for the WAN 2 interface. SLC 96
framing is only supported on WAN 2.
framing is only supported on WAN 2.
Subsystem not found
Parameter configuration group not found.
Syntax Error
No argument to the GET or SET command.
Table Index is beyond the
limit 0-95
limit 0-95
The requested performance interval and enter value is out of range.
TFTP download failed
TFTP download error.
This is not a FXS/FXO
Port
Port
Tried to configure an FXS or FXO port when not supported.
TS already taken
Tried to assign an already assigned time slot to another use.
Table A-3. Error messages (Continued)
Message
Explanation