Yamaha AW4416 Manuale Utente

Chapter7—Punch-in/out

1. Press the [UTILITY] key → [F3] key.

2. Move the cursor to the pre-roll (PREROLL) or post-roll (POSTROLL) fields, 

and use the [DATA/JOG] dial to set the pre-roll time and post-roll time.

❒ Rehearsing with auto punch-in/out

1. Press the [REC TRACK SELECT] key for the track that you wish to record 

using auto punch-in/out.

The [REC TRACK SELECT] key will blink, and the track will be in record-ready 
mode.

2. Make sure that the Locate section [IN]/[OUT] keys are lit, and press the 

[AUTO PUNCH] key.

The [AUTO PUNCH] key will light, and you will locate to the pre-roll point.

3. To begin rehearsing the auto punch-in/out, press the [PLAY] key.

1

The [PLAY] key will light, and playback will begin from the pre-roll point.

B

When you reach the auto punch-in point, the [REC] key will begin blinking, 
and the monitor signal of the track you selected in step 1 will change from the 
track playback to the input signal (recording source). However, recording will 
not actually occur.

C

When you reach the auto punch-out point, the [REC] key will go dark, and 
the monitor signal will return to the track playback. (During rehearsal, record-
ing will not actually occur.)

D

When you reach the post-roll point, the transport will locate to the pre-roll 
point and stop.