Yamaha AW4416 Manuale Utente

Chapter14—Automix

Here we will explain the procedure for recording fader operations of the monitor 
channels.

1. Press the [HOME] key of the FADER MODE section, and the [MONI] key 

of the MIXING LAYER section.

Faders 1–16 will function as the channel faders for monitor channels 1–16.

2. Locate the song to a point slightly earlier than where you wish to begin 

recording the automix.

3. Press the [AUTOMIX] key → [F1] key.

4. Move the cursor to the DISABLE button of the AUTOMIX field, and press 

the [ENTER] key.

The button will be turned on (highlighted), and its title will change to ENABLE. 
Now automix is on (i.e., can be recorded or played). Whenever automix is on, 
the 

 icon will always be displayed at the left of the on-screen counter.

5. Move the cursor to the OVERWRITE field. Turn the FADER button on, 

and turn off the remaining buttons (CH ON, PAN, EQ).

The FADER/CH ON/PAN/EQ buttons in the OVERWRITE field are used to select 
the events that will be recorded in the automix. If a button is on (highlighted), the 
corresponding type of event can be recorded in the automix. The following 
events correspond to each button.

• FADER..................Operations of the faders and AUX send 1–8 faders of each 

channel

• CH ON.................Operations of the [ON] switches of each channel

• PAN......................Pan operations of each channel

• EQ........................EQ operations of each channel

On