Yamaha AW4416 Manuale Utente

EQ/ATT/GRP screen

Assign input channels 1–24/moni-
tor channels 1–16 to mute groups 
E–H. If channels are assigned to a 
mute group, you can operate a sin-
gle [ON] key to switch the on/off 
status of all [ON] keys in that 
group.

• [EQ] key → [F4] (Mute Grp) key
• Repeatedly press the [EQ] key 

until the screen shown at the 
right appears.

M button → EQ button → Mute 
Grp tab

A

The ● symbols indicate the mute group E–H to 
which each input channel 1–24 and monitor 
channel 1–16 belongs.
When you move the cursor up or down to select 
mute group E–H and use the [SEL] key to select 
a channel, that channel will be assigned to the 
corresponding mute group. When you press the 
[SEL] key once again, the channel will be 
removed from the mute group.

A mute group may contain both channels 
that are On and channels that are Off. If a 
mute group contains channels that are On 
and channels that are Off, operating the 
[ON] key of one of the channels will turn off 
the channels that are on, and turn on the 
channels that are off.

A channel cannot belong to more than one 
mute group. If a channel that is already 
assigned to a mute group is assigned to 
another group, only the newly assigned 
group will be valid.

B

Turn mute groups E–H on/off.

If you wish to change the on/off status after 
assigning a channel to a group, you can use 
the ENABLE button of that group to tempo-
rarily disable the group.

■ Additional functions in the Mute 

In the Mute Grp page you can press the [SHIFT] 
key to assign the following additional function to 
the [F1] key.

Clear all mute group settings.

2

1