Yamaha AW4416 Manuale Utente

Monitor the input levels of input channels 
1–24 and return channels 1/2.

• [HOME] key → [F1] (1–24/Rtn) key
• Repeatedly press the [HOME] key until 

the screen shown at the right appears

M button → HOME button → 1–24/Rtn 
tab

A

These meters show the input levels of input 
channels 1–24 and return channels 1/2. The 
fader position is shown in dB units below each 
level meter.

B

This shows the position of the STEREO fader in 
dB units.

C

D

E

Select one of these three buttons to select the 
location in the signal path (pre-EQ/post-EQ/
post-fader) whose level will be shown by the 
level meters.

■ Additional functions in the 1–24/

In the 1–24/Rtn page you can press the [SHIFT] key 
to assign the following function to the [F1] key.

This key sets/defeats the Peak Hold function. 
This is the same function as the [PEAK HOLD] 
key in the level meter/counter section. When 
Peak Hold is on, a “

” symbol will be main-

tained in the level meter to indicate the peak 
level.

1

2

3

4

5