Yamaha AW4416 Manuale Utente

HOME screen

Monitor the output levels of OMNI OUT 
jacks 1–4 and the stereo output.

• [HOME] key → [F4] (Omni/ST) key
• Repeatedly press the [HOME] key until 

the screen shown at the right appears

M button → HOME button → Omni/St tab

A

These meters show the output level of OMNI 
OUT jacks 1–4. The type of signal assigned to 
each OMNI OUT jack is indicated below each 
level meter.

This page is for display only; assignments 
cannot be changed in this page. The signals 
assigned to OMNI OUT jacks 1–4 can be 
selected in the SETUP screen Patch OUT 
page.

B

This meters shows the output level of stereo out-
put.

C

This shows the position of the STEREO fader in 
dB units.

D

E

Select one of these two buttons to select the 
location in the signal path (pre-fader/post-fader) 
whose level will be shown by the STEREO OUT 
level meters.

The PRE FADER button/POST FADER button 
setting will not affect the OMNI OUT level 
meter display.

■ Additional functions in the Omni/

In the Omni/ST page you can press the [SHIFT] key 
to assign the following function to the [F1] key.

This key sets/defeats the Peak Hold function. 
This is the same function as the [PEAK HOLD] 
key in the level meter/counter section.

3

1

2

4

5