Yamaha AW4416 Manuale Utente

Assign a name to each track, and edit 
audio data by tracks, parts, or regions.

• RECORDER [EDIT] key → [F1] (TR Edit) 

key

• Repeatedly press the RECORDER 

[EDIT] key until the screen shown at 
the right appears.

M button → RECORDER EDIT button → 
TR Edit tab

A

B

C

Select one of the following three units of data 
that you wish to edit.

● Track
Edit the audio data of the entire currently 
selected track (1–16).

● Part
Within the currently selected track, edit the 
specified area of audio data.

● Region
Edit a piece of continuous audio data that was 
recorded in a single operation.
When you move the cursor to the desired menu 
and press the [ENTER] key, a list of buttons will 
appear, allowing you to select an editing com-
mand (center column in the illustration at right). 
When you then move the cursor to the desired 
command and press the [ENTER] key, a list of 
buttons for setting the parameters of that com-
mand will appear (right column in the illustra-
tion at right).

For details on the commands and parameters 
that can be selected from the TRACK/PART/
REGION menus, refer to page 101.

If you move the cursor to the command 
whose button is highlighted and press the 
[ENTER] key, you will return to the command 
list. If you move the cursor to the menu high-
lighted at the top of the list and press the 
[ENTER] key, you will return to the first 
menu.

4

1
2
3

8

5 6 7

9