Yamaha AW4416 Manuale Utente

Pagina di 507
Chapter1—Welcome to the world of the AW4416
30
        
— Operation Guide
By defeating these assignments, you can insert internal effects 1/2 into any 
desired channel, or use AUX bus 7/8 or return channels 1/2 for other purposes.
Monitor output/headphone output
As monitoring jacks, the AW4416 provides MONITOR OUT jacks and a 
PHONES jack. The types of signal that are output from these jacks will change as 
follows, depending on the state of the AW4416.
1
Initial state
The signal of the stereo output channel will be output without change from the 
MONITOR OUT jacks/PHONES jack.
B
When the [SOLO] key is on
The signal of the channel selected by the [ON] key will be sent to the SOLO bus, 
and output from the MONITOR OUT jacks/PHONES jack. At this time, all other 
signals will be muted.
C
When the TRACK [CUE] key is on
The direct output signal of the track selected by the [REC TRACK SELECT] key will 
be output from the MONITOR OUT jacks/PHONES jack.
D
When the internal metronome function is on
The metronome signal will be mixed with the output signals of 1–3.
Tip!
• The same signal is always sent from the MONITOR OUT jacks and the 
PHONES jack. However, the level adjustment is independent; the output level 
of the MONITOR OUT jacks is adjusted by the [MONITOR OUT] control, and 
the output level of the PHONES jack is adjusted by the [PHONES] control.
• Whenever the [SOLO] key and the TRACK [CUE] key are both on, only the 
TRACK [CUE] key will be valid.
EFFECT
SELECT
46
2
EFFECT
RETURN 1/2
X 2
AUX7 (EFF1),
AUX8 (EFF2)
INSERT SEND
METER
METER
PHONES
MONITOR
OUT
PHONES
MONITOR
L
R
+4dB
DA
RECORDER
TRACK CUE
Logic
MIXER SOLO
Logic
ON
ATT
RECORDER
DIRECT OUT 1
RECORDER
DIRECT OUT 16
STEREO L
STEREO R
METRONOME
SOLO L
SOLO R