Yamaha AW4416 Manuale Utente
Appendix
— Reference Guide
Appendix–
39
Display message list
Messages
AUTOMIX DISABLED.
Automix is not enabled, and cannot be recorded.
AUTOMIX MEMORY FULL!
Automix memory has no free area.
AUTOMIX NOT RUNNING.
Automix has been stopped, so recording is not possible. Pause the
recorder, and then playback.
recorder, and then playback.
AUTOMIX REC ABORTED.
Automix recording was stopped, and the data was discarded.
AUTOMIX RECORDING.
The operation cannot be executed since automix is being
recorded.
recorded.
AUTOMIX RUNNING.
The operation cannot be executed since automix is being
recorded or played.
recorded or played.
BANK A SELECTED
Since sampling pad bank A is selected, muting cannot be defeated
for this pad.
for this pad.
BANK B SELECTED
Since sampling pad bank B is selected, muting cannot be defeated
for this pad.
for this pad.
CANNOT ASSIGN DIGITAL-ST-IN.
DIGITAL STEREO IN cannot be assigned to the stereo bus cas-
cade.
cade.
CANNOT CHANGE THE MUTE
Muting cannot be defeated since this would exceed the number of
simultaneously playable tracks.
simultaneously playable tracks.
CANNOT PLAY THIS PAGE
Playback is not possible in this page.
CANNOT RECALL AUTOMIX
Recall is not possible, since automix data has not been stored.
CANNOT REDO
Redo (re-execution of an operation) is not possible.
CANNOT SELECT (MTC SLAVE)
Since the AW4416 is set to be the MTC slave, the external word
clock cannot be selected as the word clock source.
clock cannot be selected as the word clock source.
CANNOT SELECT (WC EXTERNAL)
Since the external word clock is selected as the word clock
source, the AW4416 cannot be set as the MTC slave.
source, the AW4416 cannot be set as the MTC slave.
CANNOT SET MARK
It is not possible to specify a mark at an already-specified position.
CANNOT UNDO
Undo (cancellation of an operation) is not possible.
CANNOT USE BOTH SLOTS!
OPTION I/O slot 1 and slot 2 cannot be used simultaneously.
CD PLAY MODE NOW.
Since the AW4416 is in CD Play mode, this operation is not possi-
ble.
ble.
DIFFERENT TC FRAME TYPE
MTC of a different frame type than the internal setting is being
received.
received.
DIGITAL-ST-IN REC PROHIBIT.
Recording is prohibited for the signal being input from DIGITAL
STEREO IN.
STEREO IN.
DIGITAL-ST-IN SYNC ERROR!
The signal being input from DIGITAL STEREO IN is not synchro-
nized to the word clock master.
nized to the word clock master.
DIN TO STEREO BUS REFUSE.
Since the signal was interrupted, cascading from DIGITAL STE-
REO IN to the stereo bus has been defeated.
REO IN to the stereo bus has been defeated.
EFF1 INSERT RELEASED
Effect 1 has been released from insertion because a patch library
was recalled.
was recalled.
EFF2 INSERT RELEASED
Effect 2 has been released from insertion because a patch library
was recalled.
was recalled.
FOR EFFECT2 ONLY.
The selected effect program can be used only with effect 2.
IN/OUT POINTS TOO CLOSE
The auto punch-in/out interval is too short. It cannot be set less
than approximately 100 msec.
than approximately 100 msec.