RCA 580 Manuale Utente

2 SpeedTouch™ Local Networking Setup

E-DOC-CTC-20040123-0001 v3.0

2.2 USB Connection Setup for Microsoft Windows

Supported Operating

Systems

Installing and using the SpeedTouch™ USB connection is supported by Microsoft for 
following Microsoft Operating Systems:

•

MS Windows 98SE

•

MS Windows Millennium

•

MS Windows 2000

•

MS Windows XP

You may need the Windows installation CD-ROM during installation.

The installation procedures might be slightly different depending on the MS 
Windows OS you are using:

System requirements

•

For Windows 98SE/ME:

•

Pentium processor 166 MHz or compatible

•

32 megabytes (MB) of memory

•

For Windows 2000/XP:

•

Pentium II processor or compatible

•

64 MB of memory

•

30 MB of free disk space

Prerequisites

It is strongly advised to remove any SpeedTouch™ USB driver installation that may 
reside on your PC before you install the USB drivers from the SpeedTouch™ Setup 
CD-ROM delivered with your SpeedTouch™580(i) product.
Make sure both your PC and SpeedTouch™ are turned on and operational.

In the SpeedTouch™ package, a blue USB cable is included to connect a 
single computer to your SpeedTouch™.

Installing the

SpeedTouch™ USB

connection

The installation is plug and play, meaning that installation will require almost no effort.
Proceed as follows:

Insert the blue USB cable provided into the SpeedTouch™ USB port marked with 
the USB logo: 

.

The other end of the USB cable fits in (one of) the USB port(s) of your PC. In 
most cases your PC's USB port is marked with the same USB symbol.

You can also connect your PC to the SpeedTouch™ via a USB hub.

Windows will automatically recognize the Thomson USB Remote NDIS device: