RCA 580 Manuale Utente

3 SpeedTouch™ Configuration Setup

E-DOC-CTC-20040123-0001 v3.0

Additional configuration

Some additional configuration may be needed:

•

MS Windows IP configuration
Most Service profiles will enable the SpeedTouch™ DHCP server. Since by default 
a PC’s Ethernet interface is configured for obtaining its IP configuration dynami-
cally (DHCP client), in most cases, no additional configuration is required.
To make sure that all PCs are configured as expected (DHCP or fixed IP 
addresses):

Run the SpeedTouch™ Setup Wizard on every PC that must connect to the 
WLAN.

Select Change the LAN configuration.

Follow the instructions.

For fixed IP configurations, or other advanced settings, please follow 
the instructions provided by your Service Provider or network admin-
istrator.

•

USB Configuration
If you are going to use the USB port as if it was an extra wired ethernet port, you 
will need to install the USB Remote NDIS drivers. See 

 for more information.

•

Wireless Settings
When running the SpeedTouch™ Setup wizard, the SpeedTouch™ wireless access 
point settings will be set to their default values. You might need to re-associate 
your WLAN clients, using the factory defaults WLAN settings as specified in 

.

For additional security of your wireless network it is recommend to “personalize” 
your SpeedTouch™ wireless access point settings. See 

 for more information.