RCA 580 Manuale Utente
6 SpeedTouch™ NAPT Manager
E-DOC-CTC-20040123-0001 v3.0
80
Configuration of the
SpeedTouch™
Proceed as follows:
1
As soon as the NAPT Manager has detected your SpeedTouch™ device you can
proceed with the configuration procedure.
proceed with the configuration procedure.
Note
The SpeedTouch™ may be protected by a system password. You must
provide user name and system password to continue with the configu-
ration.
provide user name and system password to continue with the configu-
ration.
2
The following page lists the application hosts currently configured on the Speed-
Touch™:
Touch™:
Click Add to enter a new application host.
3
The Add Port Mapping window appears.
If you want to:
If you want to:
•
Enter a port mapping for a specific application:
Click the Basic tab. Select an application in the Application list and enter
the Host IP Address in the appropriate fields.
Click the Basic tab. Select an application in the Application list and enter
the Host IP Address in the appropriate fields.
By default, the IP address of the PC from which you are running the NAPT
Manager will be taken as host IP address. To add a NAPT entry for another
PC, you must change the proposed IP address.
Manager will be taken as host IP address. To add a NAPT entry for another
PC, you must change the proposed IP address.