RCA 580 Manuale Utente
7 Support
E-DOC-CTC-20040123-0001 v3.0
86
7.2.1 Upgrade via the SpeedTouch™ Upgrade
Wizard
Introduction
The procedures described in this section are valid only in case:
•
You run a MS Windows Operating System or Mac OS X.
•
Your SpeedTouch™ and computer are properly connected:
•
Through Ethernet or USB in case you run an MS Windows OS
•
Through Ethernet in case you run Mac OS X
Note
It is not possible to upgrade your modem over a wireless connection.
•
The new system software file is of the type bant-d_XX427x.bin,
e.g. bant-d_AA427A.bin.
e.g. bant-d_AA427A.bin.
During the upgrade procedure in most cases configuration settings are backed up by the
wizard and restored after uploading the system software.
wizard and restored after uploading the system software.
Starting the
SpeedTouch™ Upgrade
wizard
Depending on your Operating System, you must start the SpeedTouch™ Upgrade
wizard as follows:
wizard as follows:
On MS Windows
Operating Systems
Proceed as follows:
1
Insert the SpeedTouch™ Setup CD-ROM in your computer’s CD-ROM drive. The
SpeedTouch™ CD Browser will start automatically.
SpeedTouch™ CD Browser will start automatically.
Note
If the SpeedTouch™ CD Browser window does not appear auto-
matically, click Run on the Start menu and enter the following path:
D:\Menu.exe
matically, click Run on the Start menu and enter the following path:
D:\Menu.exe
where D stands for the drive letter of your CD-ROM
drive.
2
The Choose Language window prompts you to select a language.
Select the language of your choice and click OK.
Select the language of your choice and click OK.
Note
The selected language will also be used as default language in the
SpeedTouch™ web pages. See
SpeedTouch™ web pages. See
for more infor-
mation on how to change the web page language.
Topic
Page