Hayes Microcomputer Products DIVA T/A ISDN Manuale Utente
DIVA T/A ISDN Modem User’s Guide 15
Windows 95 (OSR2)
Note: This install procedure is for Windows 95 Service Release 2
(OSR2). If you are using original release or Service Pack 1 (SP1)
version of Windows 95, go to “Windows 95” on page 13.
(OSR2). If you are using original release or Service Pack 1 (SP1)
version of Windows 95, go to “Windows 95” on page 13.
To verify the version installed on your machine, go to Control
Panel/System Properties and select the General tab. If you have
Windows 95 OSR2 installed, you should see the letter “B”, as below:
Panel/System Properties and select the General tab. If you have
Windows 95 OSR2 installed, you should see the letter “B”, as below:
Note: If you are using Dial-Up Networking, make sure you are using
version 1.2. If you are running a previous version, you must upgrade
to Dial-Up Networking 1.2, before you begin installing the DIVA T/A.
Dial-Up Networking 1.2 is located on the DIVA T/A CD under the
\MSDUN12 directory. Refer to your Windows 95 online help for
information on how to install Dial-Up Networking.
version 1.2. If you are running a previous version, you must upgrade
to Dial-Up Networking 1.2, before you begin installing the DIVA T/A.
Dial-Up Networking 1.2 is located on the DIVA T/A CD under the
\MSDUN12 directory. Refer to your Windows 95 online help for
information on how to install Dial-Up Networking.
1
Power on your PC with the DIVA T/A modem connected (see
the section “Connecting the Cables” on page 9. Windows 95
automatically detects the DIVA T/A and the New Hardware
Found Window appears followed by the Update Device Driver
Wizard.
the section “Connecting the Cables” on page 9. Windows 95
automatically detects the DIVA T/A and the New Hardware
Found Window appears followed by the Update Device Driver
Wizard.
2
Insert the DIVA T/A CD into your computer’s CD drive.
3
From the Update Device Driver Wizard window, click Next.
4
Click Other Location.