MGE UPS Systems 66244 Manuale Utente

Network
Management Cards

User Manual

T H E   U N I N T E R R U P T I B L E   P O W E R   P R O V I D E R

Network Management Card

 – User Manual

34003676EN/GA

Page 

34/69

Z 

Environment log interval: [from 5 to 99999 sec ]. Temperature and humidity measurement save period.

Default value = 300 sec. (only visible if the sensor is present).

Z 

Environment refresh rate: [from 5 to 99999 sec]. “Environment status” page refresh rate. Default value

= 60 sec. (only visible if the sensor is present).

Z 

Environment input grace period : [from 0 to 9 sec ]. Period during which a status change by one of the

inputs is not considered. Default value = 1 sec. (only visible if the sensor is present).

Z 

“Reset communication” button: performs a remote reboot of the card without modifying the configuration.

This action is compulsory for consideration of any changes made on 

” page. Security

of this operation is ensured by requesting Login and Password.

Z 

“Fatory Reset” button: enables restoration of the default configuration of all the card’s parameters. The

TCP/IP parameters: IP address, subnet mask, gateway and BootP/DHCP value are maintained if the

“Keep TCP/IP parameters” option is selected. Security of this operation is ensured by requesting Login

and Password. Default login and Password are: MGEUPS

Note:

If any of these parameters are changed, the card must be rebooted.