Motorola W24 Manuale Utente
May 31, 2008
Module Hardware Description
1
Chapter 1: Introduction
W24 is a self contained Wi-Fi module, supporting IEEE 802.11b/g systems in 2.4GHz band. W24
enables IP connectivity to any host device. It is ideal for enabling M2M applications to achieve
secure, high speed throughput and access to IP networks via 802.11b/g wireless LANs or even via
Cellular network when connected to G24 GSM/GPRS module family.
enables IP connectivity to any host device. It is ideal for enabling M2M applications to achieve
secure, high speed throughput and access to IP networks via 802.11b/g wireless LANs or even via
Cellular network when connected to G24 GSM/GPRS module family.
W24 integrates an operating system, drivers and communication stack, wide assortment of
proven security protocols, NATs for management purposes, built-in web server for managing the
device via web and inherent built-in device firewall.
proven security protocols, NATs for management purposes, built-in web server for managing the
device via web and inherent built-in device firewall.
Operation Setup
The W24 supports two operating setup configurations:
•
Stand Alone configuration
•
Stacked assembly configuration (with G24).
Stand Alone Configuration
Stand Alone configuration consists of a W24 as a stand alone Wi-Fi module that is controlled by
the host.
the host.
In this configuration, the W24 70 pin host connector (bottom connector) is used for interfacing
with the W24.
with the W24.
below illustrates the W24 Stand Alone configuration.
Figure 1-1: W24 Stand Alone Configuration
Stacked Configuration
Stacked configuration consists of a G24 that is mounted on top of the W24 in a piggy-back
configuration. In this configuration, the W24 70-pin host connector (bottom connector) is used
for interfacing with the host board, while the G24 is connected to the W24 cellular 70-pin
interface connector (top connector).
configuration. In this configuration, the W24 70-pin host connector (bottom connector) is used
for interfacing with the host board, while the G24 is connected to the W24 cellular 70-pin
interface connector (top connector).