Motorola MPMC101 Manuale Utente

4-2

Troubleshooting

1. Check to see if the system is plugged in.

2. Check to see if your monitor is plugged into 

your video adapter.

3. Check to see if the adapter is properly seated in 

the PCI bus expansion slot.

4. Try a different PCI slot.

5. Remove the adapter and see if the system boots 

up and returns to a normal state of operation.

6. Try a known, good adapter card in your system. 

If the new board also fails, check the Read Me 
item in the Main program group for information 
about reconfiguring SCSI Adapters. 

1. Check your setup. Delete the 

file in the NT 

system32/driver

 directory. If 

you are running the FAT file system, boot the 
system from a bootable DOS floppy, then delete 
the above file. Re-install the software driver for 
the PCI and PMC Adapter as per 

3. If NT still will not boot, check the Read Me item 

in the Main program group for information 
about reconfiguring SCSI Adapters. You can 
recover by using the Last Known Good 
Configuration. Refer to the Windows NT 
System Guide for more information.