ZyXEL Communications P-661HW Manuale Utente

P-661H/HW Series User’s Guide

Chapter 6 Wireless LAN

119

To configure advanced wireless settings, click the Advanced Setup button in the General 
screen. The screen appears as shown.

Figure 59   Wireless LAN: Advanced

The following table describes the labels in this screen. 

Cancel

Click Cancel to reload the previous configuration for this screen.

Advanced Setup

Click Advanced Setup to display the Wireless Advanced Setup screen and edit 

more details of your WLAN setup.

Table 40   Wireless: WPA/WPA2

Table 41   Wireless LAN: Advanced

Wireless Advanced Setup

RTS/CTS 

Threshold

Enter a value between 0 and 2432. If you select the Enable 802.11g+ mode 

checkbox, this field is grayed out and the ZyXEL Device uses 4096 automatically.

Fragmentation 

Threshold

It is the maximum data fragment size that can be sent. Enter a value between 256 

and 2432. If you select the Enable 802.11g+ mode checkbox, this field is grayed out 

and the ZyXEL Device uses 4096 automatically.

Output Power

Set the output power of the ZyXEL Device in this field. This control changes the 

strength of the ZyXEL Device's antenna gain or transmission power. Antenna gain is 

the increase in coverage. Higher antenna gain improves the range of the signal for 

better communications. If there is a high density of APs within an area, decrease the 

output power of the ZyXEL Device to reduce interference with other APs.
The options are Maximum, Middle and Minimum.