ZyXEL Communications P-661HW Manuale Utente

P-661H/HW Series User’s Guide

Chapter 3 Wizards

69

Note: The wireless stations and ZyXEL Device must use the same SSID, channel ID 

and WEP encryption key (if WEP is enabled), WPA-PSK (if WPA-PSK is 
enabled) for wireless communication.

4 This screen varies depending on the security mode you selected in the previous screen. 

Fill in the field (if available) and click Next.

Choose Manually assign a WPA-PSK key in the Wireless LAN setup screen to set up a Pre-
Shared Key.

Figure 30   Manually assign a WPA key

The following table describes the labels in this screen. 

Choose Manually assign a WEP key to setup WEP Encryption parameters.

Table 18   Manually assign a WPA key

Pre-Shared 

Key

Type from 8 to 63 case-sensitive ASCII characters. You can set up the most secure 

wireless connection by configuring WPA in the wireless LAN screens. You need to 

configure an authentication server to do this.

Back

Click Back to display the previous screen.

Next

Click Next to proceed to the next screen. 

Exit

Click Exit to close the wizard screen without saving.