Juniper Networks IDP75 Manuale Utente

Connecting to the Sensor 

„ 

25

Chapter 4: Configuring the IDP Sensor

2.

On a connected computer, open a Web browser. Type https://192.168.1.1.

3.

Type the default user name (root) and password (abc123).

4.

Skip to “Simple or Advanced Configuration Using the Management Port” on 
page 25.

Connecting Remotely Using the Management Port

To connect to the management port remotely over the network, you must first have 
configured an IP address for the sensor. See “Using the Console Serial Port to 
Configure the Sensor” on page 22.

To connect remotely to the management port:

1.

On a connected computer, open a Web browser. 

2.

Type the URL of the ACM wizard using the IP address you configured. For 
example, if you configured the IP address 10.100.200.1 on the IDP sensor, 
type https://10.100.200.1 in the browser’s Address or Location box.

3.

Type the default user name (root) and password (abc123).

4.

Go to “Simple or Advanced Configuration Using the Management Port” on 
page 25.

The IDP sensor management port provides two different, but compatible, 
configuration paths. The QuickStart option lets you configure the default IDP 
settings quickly, while the Appliance Configuration Manager (ACM) option lets you 
make more advanced changes to the sensor configuration.

After you log into the Web-based tools using the management port, you are 
presented with two options: QuickStart and ACM. If you want to do a simple 
configuration, click QuickStart and fill out the fields based on the information in 
Table 12 on page 26.

If you want to do an advance configuration, click ACM, and then click Start 
Configuration Wizard. Fill out the fields in the wizard based on the information in 
Table 13 on page 26.

NOTE: 

Because the ACM uses an SSL connection, you must type https:// before the 

IP address.

NOTE: 

Because the ACM uses an SSL connection, you must type https:// before the 

IP address.