ZyXEL Communications PLA SERIES Manuale Utente
Chapter 5 Powerline Network Setup Tutorial
PLA Series User’s Guide
41
5.3 Accessing Your Powerline Adapter
1
Plug the powerline adapter you want to add to your network into a power socket and, if needed,
switch the power socket on.
switch the power socket on.
Figure 20
Plug Your Powerline Adapter into a Power Socket
2
Connect the powerline adapter to your computer.
3
Use a LAN or Ethernet cable (shown below) to connect the LAN or Ethernet port on your adapter to
the same kind of port on your computer.
the same kind of port on your computer.
Figure 21
Connect Your Powerline Adapter to a Computer
4
Open the ZyXEL PLA Series Configuration utility on your computer. See
for how to launch the utility.
5
You are now ready to extend your powerline network or set up a second network.
• See
to add a new powerline adapter to your network.
• See
to set up a second network with your new adapters.
• See
to set up a second network with your existing adapters.
5.4 Adding a Powerline Adapter
This section shows you how to add a new powerline adapter to expand your existing network.
1
PLA
2
3